Rangemaster RDXD21, User Manual & Installation & Service Instructions

Page: 30 / 40

26
ArtNo.600-0034 - Clearances
100 mm
50 mm
ArtNo.600-0033 - Door clearances
50 50
666
347
347
All dimensions in mm
Positioning Your Appliance
n
The refrigerator must be carried by at least 4 people.
The original packaging and foam may be kept for re-
transportation (optional).
Fasten your fridge with thick packaging, bands or strong
cords and follow the instructions for transportation given on
the package.
Remove all movable parts (shelves, accessories, vegetable
bins, etc.) or fix them into the fridge against shocks using
bands during re-positioning and transportation.
An ambient sensor, main board and hinge covers are
available on your refrigerator. During cleaning, make sure no
fluid enters this area.
Choosing the Right Location
•
To ensure adequate ventilation, clearance of at least
100 mm is required at the top of your appliance. The
distance between the appliance and back wall must
be a minimum of 50 mm (
Fig. 7.1
). Any units placed
above the appliance must be clear by 100 mm to allow
sufficient ventilation.
• If locating the refrigerator close to a corner, sufficient
spacing must be left for opening the doors and
removing the shelves ( Fig. 7.2 ).
Avoid exposing the appliance to direct sunlight, and sources
of heat (such as radiators, heaters or cookers).
If this appliance is situated in a cold environment (such as
a shed, outhouse or garage) it will affect its performance.
You may find that the performance of the appliance is not
consistent and this may damage foods. A consistent ambient
temperature of 16 °C or above is recommended.
Fig. 7.1
Fig. 7.2
All dimensions in mm