background image

17

4. Troubleshooting

Resolving Minor Problems Yourself

Experience has shown that you can resolve most problems 

that occur during normal daily usage yourself, without having 

to call out a service engineer. Not only does this save costs 

but it also means that the dishwasher is available to use. The 

following list of common occurrences and their remedies 

should help you identify the causes of most problems.

Problems When the Unit is Switched On

Dishwasher does not start up

• 

Fault with fuse in mains electricity supply. 

• 

Plug not inserted in wall socket.

• 

Dishwasher door not closed properly.

• 

Program button has not been pressed.

• 

Water tap not turned on.

• 

Blocked filters.

• 

Blocked strainer in water intake hose. 

n

n

CAUTION! 

Remember that repairs should only be carried out by 

a suitably qualified specialist. Improper repairs can 

lead to considerable equipment damage as well as 

danger to the user.

Problems With the Dishwasher

Error display on the program display

When the program display displays 

F1

 

(Fig.4-1) 

this means  

there is a risk of water overflow. Turn off the water tap and 

contact the nearest authorized service centre.
When the program display displays 

F2

 

(Fig.4-2) 

this 

means that the waste water within the machine cannot be 

discharged. Check if:
• 

The filters within the dishwasher are clogged;

• 

The drain hose is crimped or bent;

• 

The drain hose is clogged.

If after checking the above the problem continues, contact 

the nearest authorized service centre.
When the program display displays 

F3

 

(Fig.4-3) 

this means 

that the flow of water into the dishwasher cannot be 

stoppped. Turn off the water tap and contact the nearest 

authorized service centre.
When the program display displays 

F5

 

(Fig.4-4) 

this means 

that there is not enough water for the dishwasher to operate 

correctly.
Check if:
• 

The water is turned on and the hose is connected 

properly;

• 

The water supply to the house is on and has sufficient 

pressure;

• 

The water supply hose is crimped or bent;

• 

The filter for the water supply hose is clogged.

Fig.4-1

Fig.4-2

Fig.4-3

Fig.4-4

DocNo.800-0401 - Troubleshooting - RDW6012 dishwasher

Summary of Contents for RDW1045FI





























Reviews: