Rangemaster Longstock 90 Induction User'S Manual & Installation Instructions Download

Page: 37 / 44

10. Technical Data

INSTALLER:

Please leave these instructions with the user.

DATA BADGE LOCATION:

Cooker back, serial number repeater badge below the oven door opening.

COUNTRY OF DESTINATION:

GB, IE.

Connections

Electric

230 / 400 V ~ 50 Hz 3N

Dimensions

Total height

Min 905 mm

Max 930 mm

Total width

900 mm

Total depth

608 mm excluding handles, 659 mm including handles

Minimum space above hotplate

650 mm

Hotplate Ratings

Max: 1.85 kW

Boost: 2.5 kW

Max: 1.85 kW

Boost: 3.0 kW

Max: 1.85 kW

Boost: 2.5 kW

Max: 1.15 kW

Boost: 2.0 kW

Max: 1.15 kW

Boost: 2.0 kW

Zone 1

Zone 2

Zone 3

Zone 5

Zone 4

Hotplate energy saving tips

Oven energy saving tips

Use cookware with a flat base.

Cook meals together, if possible.

Use the correct size cookware.

Keep the pre-heating time short.

Use cookware with a lid.

Do not lengthen cooking time.

Minimise the amount of liquid or fat.

Do not open the oven door during the cooking period.

When liquid starts boiling, reduce the setting.

Do not forget to turn the appliance off at the end of cooking.

Summary of Contents for Longstock 90 Induction













































Search results

Summary of Contents for Longstock 90 Induction

Reviews:

Related manuals for Longstock 90 Induction

Brands by name

Popular brands

Rangemaster Longstock 90 Induction, User'S Manual & Installation Instructions

Search results

Summary of Contents for Longstock 90 Induction

Reviews:

Related manuals for Longstock 90 Induction

Brands by name

Popular brands