WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
34
Removing the Control Panel
Models with a Handrail
To remove the handrail, remove the two end bracket fixing
screws (Fig. 8.4). These may be hidden by removable covers.
Pull these to remove.
Now remove the 2 cross-headed screws hidden behind the
handrail end brackets (Fig. 8.5).
Pull off all the control knobs and remove the fixing screws
underneath the control panel.
Lift the control panel and pull forwards, taking care not to
damage or strain the wiring.
All Models
Pull off all the control knobs and remove the fixing screws
underneath the control panel.
Some control panels are held by three holes in the top edge;
one either end and one in the centre. These locate on tags on
the inner panel (Fig. 8.6). Lift the control panel clear of the
tags and pull forwards, taking care not to damage or strain
the wiring.
Oven Thermostat Bypass
Remove the thermostat bypass screw and fit the new one
in each oven (see the back page of this book for the correct
bypass screws).
Refit the control panel.
Grill Injector
Lift up the spring retaining the grill holder and slide the jet
holder out of the burner venturi (Fig. 8.7). Remove the grill
jet from the adaptor and fit a new jet (see the back page of
this book for the correct jets). Refit the jet holder back into
the burner venturi.
Oven Burner Injector
Remove the oven furniture. Remove the securing screw at the
right-hand end of the burner assembly (Fig. 8.8). The burner
is held in place by dimples in the mounting bracket. Slide the
burner to the left and lift up, taking care not to disturb the
ignition electrode or the flame supervision device electrode
positions.
Remove the oven jet from the adaptor and fit the new jet
(Fig. 8.9) (see the back page of this book for the correct jets).
Reassemble in the reverse order.
ArtNo.333-0005 - 90 Bray gas
grill injector - change jet
Art No 215-0028 - Handrail fascia fixings
ArtNo.210-0009 - Classic
removing the handles
Fig. 8.4
Fig. 8.5
Fig. 8.6
Fig. 8.7
Fig. 8.8
Fig. 8.9
