Rangemaster INC110DFFBL, User'S Manual & Installation Instructions

Page: 28 / 44

24
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Checking the Parts:
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
NOTE: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
This appliance is supplied set for G20 20 mbar Cat II2H3+.
A conversion kit for another gas is available for the cooker.
If the appliance is to be converted to another gas we
recommend that this is carried out before installation.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with gas
through a flexible hose, a stability bracket or chain must
be fitted. These are not supplied with the cooker but
are available at most builders’ merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4. Steel tape measure
5.
Cross head screwdriver
6. Flat head screwdriver
7.
Spirit level
8. Pencil
9.
Adjustable spanner
10. Screws for fitting stability bracket
11. 4 mm & 3 mm Allen keys
4 pan supports Griddle plate
ArtNo.110-0002 110 pan supports
ArtNo.311-0043 - Griddle 09
Grill pan & trivet 4 flat shelves
Plinth Stability location bracket