Rangemaster ECL60HPNGFBL/BL, User Manual & Installation & Service Instructions

Page: 7 / 32

3
ArtNo.311-0001 Right pans gas
ArtNo.316-0025 RGG77 hob control to high
ArtNo.316-0026 RGG77 hob control to low
The diagram by each of the control knobs indicates which
burner that knob operates (
Fig. 2.1
). Each burner has a
special Flame Safety Device (FSD) that stops the flow of gas if
the flame goes out.
To light a burner, push in and turn the associated control
knob anti-clockwise (
Fig. 2.2
) to the ‘high’ position indicated
by the large flame symbol [  ]. Keep the knob pressed down
for 3-5 seconds to let the gas through to the burner. The
igniter should spark and light the gas.
If, when you let go of the control knob the burner goes out,
then the safety device has not held in. Turn the control to the
off position and wait one minute then try again, this time
holding in the control knob for slightly longer.
Adjust the flame to suit by turning the control knob clockwise
(
Fig. 2.3
).
Ensure that the flames are under the pans. Using a lid will
help the contents boil more quickly (
Fig. 2.4
).
Large pans should be spaced well apart.
Wok
Diameter: 22-24 cm
Gas burner: 4.0 kW
Semi-rapid
Diameter: 16-18 cm
Gas burner: 1.75 kW
Auxilliary
Diameter: 10-14 cm
Gas burner: 1.0 kW
Semi-rapid
Diameter: 16-18 cm
Gas burner: 1.75 kW
Fig. 2.1
Fig. 2.2
Fig. 2.3
Fig. 2.4
Type Material Power supply
ECL60HPNGFBL-BL Glass 230V 50Hz
2. Hob Overview