WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
30
S
S
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
S
S
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
M
H
G
Art No 215-0028 - Handrail fascia fixings
ArtNo.210-0009 - Classic
removing the handles
S
S
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
S
S
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
M
H
G
A
B
C
ArtNo.311-0010 Injectors
A – Jet, B – Internal injector, C – External injector
Check the
‘Technical Data’
section of the instruction book
that the cooker is convertible to the gas you want to use.
In the UK this conversion must be performed by a gas
safe register operative. After conversion the installation
must comply with the relevant regulations and also the
local electricity supply company requirements. Read the
instructions before converting this appliance.
n
n
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and lead
to prosecution.
n
n
When servicing or replacing gas-carrying
components disconnect from gas before
commencing operation and check appliance is gas
sound after completion.
n
n
Do not use re-conditioned or unauthorised gas
controls.
n
n
Disconnect from the electricity supply before
commencing servicing.
n
n
Before electrical re-connection, check that the
appliance is electrically safe.
Hotplate
Injectors
Remove the burner caps and heads. Remove the old jets
(Fig. 9.1). Fit the new jets (see the ‘Technical Data’ section
at the back of this book for the correct jets). Reassemble in
reverse order.
Bypass Screw Adjustment
The valves in this cooker are fitted with adjustable bypass
screws. The cooker is supplied with the bypass screws set for
Natural gas. For LPG conversion the bypass screws must be
screwed all the way down.
It may is possible to adjust the bypass screw by simply
removing the control knobs (Fig. 9.2).
If however you are unable to access the bypass screw using
a suitable screwdriver, you will need to remove the control
panel, please refer to section
‘Removing the Control Panel’
.
Removing the Control Panel
To remove the handrail, remove the two end bracket fixing
screws (Fig. 9.3). These may be hidden by removable covers.
Pull these to remove.
Now remove the 2 cross-headed screws hidden behind the
handrail end brackets (Fig. 9.5).
Pull off all the control knobs and remove the fixing screws
underneath the control panel (Fig. 9.5).
The control panel will drop down slightly. Clear the holes
from the inner panel and pull the control panel forward. Take
care not to damage or strain the wiring
9. All Gas - Conversion to LPG
Fig. 9.1
Fig. 9.2
Fig. 9.3
Fig. 9.5
Fig. 9.4
