background image

24

INSTALLATION 

Check the appliance is electrically safe and gas sound when you have finished.

Dear Installer

Before you start your installation, please complete the details 

below, so that, if your customer has a problem relating to 

your installation, they will be able to contact you easily.

Safety Requirements and 
Regulations

 

n

This cooker must be installed in accordance with 

the relevant instructions in this booklet, with the 

relevant national and local regulations, and with 

the local gas and electricity supply companies’ 

requirements.

 

n

This cooker is a Class 2 Subclass 1 appliance.

 

n

Before installation, make sure that the cooker is 

suitable for your gas type and supply voltage. See 

the data badge.

 

n

The appliance must be installed in accordance with 

the regulations in force and only in a well-ventilated 

space.

 

n

Read the instructions before installing or using this 

appliance.

 

n

In your own interest and that of safety, it is law 

that all gas appliances be installed by competent 

persons. Failure to install the appliance correctly 

could invalidate any warranty or liability claims and 

lead to prosecution.

 

n

This appliance can be converted for use on another 

gas.

In the UK the cooker must be installed 
in accordance with:

• 

All relevant British Standards / Codes of Practice, in 

particular BS 5440 Part 2.

• 

For Natural Gas – BS 6172 and BS 6891.

• 

For LP Gas – BS 5482-1 (when the installation is in a 

permanent dwelling), BS 5482-2 (when the installation 

is in a caravan or other non-permanent dwelling) or BS 

5482-3 (when the installation is in a boat).

• 

The Gas Safety (Installation and Use) regulations.

• 

The relevant Building / IET regulations.

In the Republic of Ireland the cooker 
must be installed in accordance with:

The installation must be carried out by a competent person 

and installed in accordance with the current edition of IS 813 

“Domestic Gas Installations”, the current Building Regulations 

and reference should be made to the current ETCI rules for 

electrical installation.

Provision of Ventilation

This appliance is not connected to a combustion products 

evacuation device. Particular attention shall be given to the 

relevant requirements regarding ventilation.
All rooms require a window that can be opened, or 

equivalent, while some rooms require a permanent vent in 

addition to the window.

In the UK:

The room containing the cooker should have an air supply 

in accordance with BS 5440 Part 2. All rooms require an 

openable window or equivalent, while some rooms require 

a permanent vent in addition to the openable window. The 

cooker should not be installed in a bedsitting room with 

volume less than 20 m³. If it is installed in a room of volume 

less than 5 m³ an air vent of effective area 100 cm² is required; 

if it is installed in a room of volume between 5 m³ and 10 m³, 

an air vent of effective area 50 cm² is required; while if the 

volume exceeds 11 m³, no air vent is required.
If there are other fuel burning appliances in the same room, 

BS 5440 Part 2 should be consulted to determine the requisite 

air vent requirements.

In the Republic of Ireland:

Reference should be made to the current edition of IS 813, 

which makes clear the conditions that must be met to 

demonstrate that sufficient ventilation is available.

ArtNo.050-0011 - Installer information table

Installer’s Name

Appliance Serial Number

Installer’s Telephone Number

Installer’s Company

8.  Installation

Summary of Contents for CLA110DFF









































Reviews: