Press « » icon and keep on till you reach the uplink gain (the
uplink gain figure is flickering), then press « » to decrease the
gain as per the request, you can also press « » to increase the
gain once the setting is not proper. Please do remember to press
« » again to confirm the settings after setting to the right
value.
The Smart function means that the repeater can set the gain
automatically. Users could press « » to turn ON or turn OFF
this function.
Remark: When the Smart function is on, users can not
set the gain manually. If you need to set the gain by hand,
please first turn OFF the Smart function and then follow
the instruction of MGC setting.
13
The same operation isfor setting the DownLink gain.
•
•
3.4. Manual Gain Control (MGC)
3.5. Smart function
4.1. General conditions
4. Installation
First, assemble the mobile signal amplification system. Use the
following additional equipment:
An outdoor antenna that will provide communication between
he repeater and base stations of mobile operator.
An indoor antenna or several antennas that will provide
communication between the repeater and mobile devices.
