RR5055 Blade Grinder
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
The blade is now set in the
machine
The next steps involve
getting the blade lined up
with the grinding stone to
do the appropriate grind on
the tooth
Now, locate this panel on
the side of the machine
Make sure the other
orange switch located just
left of this panel is in the
“off” position for now
Turn the dial up to around
the fourth dot- this is a
nice speed to use when
setting the blade up
This dial controls how
quickly the upper table
assembly moves back and
forth
Now turn the black switch
that is shown in this
picture to the “on” position
The upper table assembly
should be moving back and
forth now
The blade should be fed,
one tooth at a time by the
Push Tooth pin at this time
