background image

Manual-

Faders

Magnetic faders are used for both Channel Faders and Cross-

fader (the same faders used in the TTM 56). Each fader has an 

independent Contour control and a Reverse switch.

CONTOUR

These controls provide a full range of fader adjustment from 

constant power (Slow) to extremely fast cut (Fast).

CHANNEL SWAP

This button reverses the channel assignment for 

all three faders

Pressing the switch toggles Channel Swap on and off. When the 

yellow indicator is lit, Channel Swap is engaged. When chan-

nels are swapped, the PGM 1 Fader controls PGM 2 and the 

PGM 2 Fader controls PGM 1. PGM 1 is also moved from the 

A

 side of the Crossfader to the 

B

 side of the Crossfader. Fader 

Contour and Reverse controls stay with the original Fader. Fader 

1 Contour and Reverse is always with the left Fader and Fader 2 

Contour and Reverse is always with the right Fader. This switch 

is slightly recessed to prevent accidental engagement.

METER

The Meter has two modes of operation. The 

METER

 switch 

toggles between dual mono 

CUE

 and 

STEREO HOUSE

When the green indicator is lit, the Meter displays Stereo Mix 

output. When the green indicator is off, the Meter displays Dual 

Mono Cue. The red OL indicator lights at 0 dBFS (clipping). 

The Meter displays both true rms and true peak. The peak signal 

indicates remaining headroom (how close to clipping) and the 

rms meter shows the average signal level, which is good for 

matching the perceived loudness of two signals. If the red OL 

indicator lights, turn the level down using the Gain control.

OL indicators follow mode selection. If the Meter is set to 

CUE, OL is independent for PGM 1 and PGM 2. If the Meter 

is set to STEREO HOUSE, left and right OL are shown for the 

mix.

On = Stereo House Metering

Off = Dual Mono Cue Metering

0

20

40

60

80

100

Channel and CrossFader Contour

travel

dB 

A

ttenuation

SLOW

FAST

REVERSE

These switches are provided for each fader just to the right of 

each Contour control. Reverse toggles on (lit green) and off with 

each push of the switch. These switches are slightly recessed to 

prevent accidental engagement.

OL
+8
+4
+2

0

–4

–2

–8

–16

–24

PERFORMANCE MIXER

METER

TTM 57SL

A

B

SLOW

FADER 1 CONTOUR

FAST

SLOW

FADER 2 CONTOUR

FAST

SLOW

CROSSFADE CONTOUR

FAST

CHANNEL

SWAP

STEREO

HOUSE

REVERSE

REVERSE

REVERSE

Summary of Contents for TTM 57SL













































Reviews: