Rane SERATO SL 1 Operator'S Manual Download Page 2

RANE SL1 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0

2

Important Safety Instructions

For the continued safety of yourself and 
others we recommend that you read 
the following safety and installation 
instructions. Keep this document in a safe 
location for future reference. Please heed 
all warnings and follow all instructions. 

Do not use this equipment in a location 
where it might become wet. Clean only 
with a damp cloth. This equipment may 
be used as a table top device, although 
stacking of the equipment is dangerous 
and not recommended. 

Equipment may be located directly above 
or below this unit, but note that some 
equipment (like large power amplifiers) 
may cause an unacceptable amount of 
hum or may generate too much heat 
and degrade the performance of this 
equipment. Only use attachments and 
accessories specified by Rane. Refer all 
servicing to qualified service personnel. 
Servicing is required when the apparatus 
has been damaged in any way, such as 
spilled liquid, fallen objects into an opened 
chassis, exposure to rain or moisture, a 
dropped unit, or abnormal operation.

FCC Statement

This equipment has been tested and 
found to comply with the limits for a Class 
B digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed 
to provide reasonable protection against 
harmful interference in a residential 
installation. This equipment generates, 
uses and can radiate radio frequency 
energy and, if not installed and used 
in accordance with the instructions, 
may cause harmful interference to 
radio communications. However, there 
is no guarantee that interference will 
not occur in a particular installation. 
If this equipment does cause harmful 
interference to radio or television 
reception, which can be determined 
by turning the equipment off and on, 
the user is encouraged to try to correct 
the interference by one or more of the 
following measures:
• Reorient or relocate the receiving 
antenna.
• Increase the separation between the 
equipment and receiver.
• Connect the equipment into an outlet on 
a circuit different from that to which the 
receiver is connected.
• Consult the dealer or an experienced 
radio/TV technician for help.

CAUTION

: Changes or modifications not 

expressly approved by Rane Corporation 
could void the user’s authority to operate 
the equipment.

This Class B digital apparatus complies 
with Canadian ICES-003.

Cet appareil numérique de la classe B 
est conforme à la norme NMB-003 du 
Canada.

FCC Declaration of Conformity

Brand: Rane
Model: SL1

This device complies with part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) This device 
may not cause harmful interference, 
and (2) this device must accept 
any interference received, including 
interference that may cause undesired 
operation.

Responsible Party:
Rane Corporation
10802 47th Avenue West
Mukilteo WA 98275-5000 USA
Phone: 425-355-6000

Summary of Contents for SERATO SL 1









































Reviews: