Manual-2
Getting started
1) Install the software
Mac
Insert the Software Installation CD-ROM and double-click the
installer icon.
Windows XP and Vista
1. Insert the Software Installation CD-ROM. If Setup doesn’t
start automatically, browse to the CD drive and run
setup.exe
. Note: Select
custom install
to change the directory
you wish to install Scratch
LIVE
into.
2. Follow the on-screen instructions. Once the installation is
complete, Scratch Live appears in the Start Menu under
All
Programs > Serato > Scratch Live
.
2) Connect and install the hardware
Mac
Mac users need only connect the SL 1 hardware after installing
the software. No extra hardware installation is required.
Windows XP
1. Connect the SL 1 (Scratch
LIVE
interface) to your computer
using the supplied USB cable.
2. The
Windows New Hardware Wizard
appears.
5. Click
Finish
once installation is complete.
Windows XP treats each USB port individually. You might
like to install Scratch
LIVE
on all of your USB ports, so you can
connect the hardware to any port.
Note: You may be prompted the location of “
SeratoUsb.sys
”.
Browse to find this file on the Scratch
LIVE
install CD or web
download, under “
Drivers\SL 1
”.
Windows Vista
When you plug in your hardware:
1. A Found New Hardware wizard will pop up.
2. Choose "Locate and install driver software"
3. After Windows looks for the driver it will say "Windows
couldn't find driver software for your device. Choose "Browse
my computer for driver software"
4. Browse to the location that you extracted the ScratchLIVE.zip
file to. Choose the Drivers folder.
5. Click next and Windows will say "Windows can't verify the
publisher of this driver software". Click "Install this driver
software anyway".
6. When you see the bubble "Your new hardware is installed and
ready to use," proceed to install the Scratch
LIVE
driver.
3. Insert the Software Installation CD-ROM if it’s not already
inserted, then press
Next
.
4. Windows may complain that the software driver is not digitally
signed. Choose
Continue Anyway
.
