Manual-1
OPERATORS MANUAL
MM 8x MIXER
QUICK START
Here are a few basic “plug and play” steps to get you performing. If you are a first time DJ mixer user, please do
yourself a favor and at least read this section.
Begin by making sure your amplifier is off before making connections. The MM 8x has all unbalanced connectors,
except for the 1/4” balanced main outputs and XLR microphone inputs. Plug a source component, such as a CD player,
into one of the four
LINE
inputs on the rear. Connect the
MAIN OUTPUTS
to your amplifier. Set all front panel controls
to the middle of their travel and all pushbuttons to their
out
position. Slide the
MASTER LEVEL
down to
0
. Set an
INPUT SELECT
switch to your active source input. Plug in the MM 8x’s power supply and see the
PWR
indicator
illuminate. Turn on your source and amplifier. Slowly turn up the
MASTER LEVEL
and see the meters lighting and hear
music from your speakers.
In use, you can get tripped up at two places. If you have a phono signal into one of the four
PH/LN
inputs, be sure the
PH/LN
switch is in the
PHONO
position (
in
); likewise, when using a tape deck or CD into these inputs, be sure the switch
is in the
LINE
(
out
) position. If you plug into the
PROGRAM LOOP
, the internal signal path is broken. Be sure that a
complete loop is made, to and from an outside device.
Couldn’t be easier, right?
Never connect anything except a Rane power supply to the thing that looks like a telephone jack on the rear or the
unit
.
This is an AC input and requires special attention if you do not have a power supply
exactly
like the one originally
packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.
