Manual-2
FRONT PANEL DESCRIPTION
햲
POWER switch. Your basic, straightforward power switch. When the yellow LED is lit, the HC 6 is ready to go.
햳
Front panel PHONE Output jacks are in parallel with the rear panel stereo Output jacks. Use them to monitor any of the
six Channels for level or mix adjustments, or for easy access when the HC 6 is rack mounted. Plugging into these front jacks
does not disengage the rear Outputs.
햴
Individual LEVEL controls set the volume for each set of headphones, regardless of whether they are driven from the
MASTER INPUTS or from the direct stereo INs. When using the front and rear panel headphone jacks together, this control
varies the level of each headphone simultaneously.
햵
SIGNAL PRESENT indicators light (green) with any input signal above -20 dBu. See OPERATING INSTRUCTIONS
(on page Manual-4) for additional details.
햶
STEREO/MONO switch converts the MASTER INPUTS from stereo to mono so that a single input cable drives both sides
of the headphones.
햷
MASTER CONTROL sets the volume simultaneously to all headphones driven from the MASTER INPUTS. This does not
alter the volume on any headphones driven from the direct stereo INs.
