Rane AC 22, Datasheet

Page: 2 / 4

AC 22 & AC 22B
ACTIVE CROSSOVERS
Data Sheet-2
Parameter Specification Limit Units Conditions/Comments
Crossover: Alignment Linkwitz-Riley Proprietary 4th-order state-variable
..........Slopes 24 dB/octave
..........Range 70-3.6 kHz Low to High 41-detent continuously variable pot
Time Delay Adjust Range Off to +2 5% ms Low & Mid Outputs
AC 22 Inputs: Type Active Balanced/Unbalanced
..........Connectors ¼" TRS
..........Impedance 20k 1% ohms
..........Maximum Level +21 1 dBu
..........Gain Range Off to +6 -0/+4 dB
AC 22 Outputs: Type Active Unbalanced
..........Connectors ¼" TS
..........Impedance 100 1% ohms
..........Maximum Level +20 1 dBu 600 ohms or greater
..........Gain Range Off to +6 -0/+4 dB
AC 22B Inputs: Type Active Balanced
..........Connectors XLR pin 2 hot per AES standards
..........Impedance 20k 1% ohms
..........Maximum Level 21 1 dBu
..........Gain Range Off to +6 -0/+4 dB
AC 22B Outputs: Type Active Balanced
..........Connectors XLR pin 2 hot per AES standards
..........Impedance 200 1% ohms
..........Maximum Level +20 1 dBu 600 ohms or greater
..........Gain Range Off to +12 -0/+4 dB
Band Muting Switches Yes Low & Mid Outputs
RFI Filters Yes
Infrasonic Filter 20 Hz, 18 dB/oct., Butterworth 3% Hz
Ultrasonic Filter (AC 22) 40 kHz, 6 dB/oct., Bessel 3% Hz Linear phase
Frequency Response 20-40 kHz +0/-3 dB
THD+Noise 0.02 .01 % +4 dBu, 20-20 kHz
IM Distortion (SMPTE) 0.02 .01 % 60 Hz/7 kHz, 4:1, +4 dBu
Signal-to-Noise Ratio 92 2 dB re +4 dBu, 20 kHz noise bandwidth
Unit: Agency Listing
..........120 VAC model Class 2 Equipment National Electrical Code
UL & CSA Exempt Class 2 equipment
..........230 VAC model CE-EMC EMC directive 89/336/EEC
CE-Safety Exempt per Art. 1, LVD 73/23/EEC
Power Supply: Agency Listing Class 2 Equipment
..........120 VAC model UL File no. E88261
CSA File no. LR58948
..........230 VAC model CE-EMC EMC directive 89/336/EEC
CE-Safety LV directive 73/23/EEC
..........100 VAC model Built to JIS Japan only
Power Supply Requirement 18 VAC w/center tap 0.1 Vrms RS 1 (see data sheet)
..........Maximum Current 160 mA RMS Current from Remote Supply
Unit: Construction All Steel
..........Size 1.75"H x 19"W x 5.3"D (1U) (4.4 cm x 48.3 cm x 13.3 cm)
..........Weight 4 lb (3 kg)
Shipping: Size 4.25" x 20.3" x 13.75" (11 cm x 52 cm x 35 cm)
..........Weight 8 lb (5 kg)
Note: 0 dBu=0.775 Vrms