3.
Once the Alarm time is set, either press the SNOOZE key or wait for automatic timeout to
exit the alarm setting mode.
Repeat the same steps using ALM2/MIN to enter the Alarm 2 setting mode (Alarm 2 time will
start flashing).
Note:
Ensure that the alarm icons (((1))) or/and (((2))) are displayed on the LCD otherwise the alarm(s)
will not sound when the alarm time is (are) reached. The duration for the alarm ring time is about
90 seconds.
Alarm Time
Display
To set the alarm ON/OFF, press the ALM1/HOUR or ALM2/MIN until the (((1))) or/and (((2))) icon
appears = ON or disappears = OFF.
TO STOP THE ALARM(S):
When the alarm is sounding, either press the ALM1/HOUR key, the ALM2/MIN key, or the
MODE key to stop the alarm, or press the SNOOZE key to enter in the snooze mode.
SNOOZE SETTING
To use the snooze feature, simply press the SNOOZE key when the alarm is sounding and the
alarm will snooze from the start of next minute for 6 full minutes before automatically sounding
again. When the alarm is snoozing, the alarm icon (((1))) or (((2))) will start flashing indicating
that the alarm is active but in Snooze mode.
To stop the snooze function when it is in snooze period, press and hold the SNOOZE key until a
“beep” is sounded. You can also press the ALM1/HOUR key, the ALM2/MIN key, or the MODE
key once to stop the snooze function.
MEMORY ALARM (STORAGE OF ALARM TIMES)
MEMO Icon (flashing)
This unique feature enables to view four previously alarm set times including the current alarm 1
time. To select the desired alarm time from a previously recorded alarm time without the need to
re-enter that specific alarm time, please follow these steps:
1.
Press the MEMO key to select from any previously recorded alarm times (current alarm 1
time and the 3 previous alarm times).
2.
Press either the ALM1/HOUR or ALM2/MIN key to store the selected alarm time as the
current set alarm time for Alarm 1 or Alarm 2.
