10
Replacement of battery
Unplug the DC plug of the battery box and
remove the battery box from the bottom of
the toilet.
Remove the cover of battery box and
replace old batteries with new batteries,
and then re-install the cover.
Insert the DC plug of battery box into the
DC socket of toilet and then stick the
battery box to the Velcro on the bottom of
the toilet.
Emergency Troubleshooting
No water supply
Put around 2.1Gal (8L) water into a barrel
and flush the bowl .
Note: Avoid water spilling from bowl.
2.Unplug and remove the battery box and
then remove all batteries.
Tips: When using the toilet again, re-connect
the water supply and re-install the
battery box.
When the product is left unused for
long time
Especially in winter when no one at home
for a long time, please drain out the water
inside tank and pipe to prevent freezing.
To discharge water
1. Drain out the water in the bowl
Activate flushing, and then turn off angle
valve to prevent water inlet.
3. Drain out the water inside pipe
Unscrew the hose connector off angle
valve, drain the water in the pipe and
reinstall.
4. Handle the remaining water in bowl
It is suggested to put some
antifreeze into water inside
the bowl.
Note
:
Before draining out the water
inside the pipe, please ensure
drain out the water in the bowl
first!
Notes:
1.Must be 1.5V “AA” alkaline battery;
2.Different brands, different used and new
batteries cannot be mixed.
3.Battery life will be significantly reduced when
using non-alkaline batteries;
4.When installing the inner box components,
follow the installation direction shown in the
label.
Summary of Contents for W5100S
Page 14: ......
Page 15: ...12 frequency three 3 years...