Description
R&S
®
ZZA-GE23
3
Assembly Instruction, English 5601.5655.02 ─ 03
1
Description
The R&S
ZZA-GE23 Rack Adapter 2HU is designed for installing units of the suppor-
ted instruments in 19 inch systems. The dimensions of the rackmount kits are designed
according to the 19 inch standard DIN 60297-3-101.
For the installation of the racks in 19 inch cabinets, rails must be used.
The R&S
ZZA-GE23 Rack Adapter 2HU is supplied without front handles. However, it
can be retrofitted at any time with handles. Thus, you can define the look of the han-
dles individually according to your wishes. You can use all standard handle bars with
55
mm spacing and M4 thread. The outer dimensions should not exceed 65
mm. For
the assembly of the handles, use M4x10 countersunk screws.
Suitable examples:
●
Ganter handle GN 425.6-8-55-EL (available from Ganter)
●
Rohde handle series ST, ST 08.055.22 (available from Rohde AG, Ettinger, .....)
All necessary screws for mounting are included.
Shipping of instruments built in to the rack is not permitted.
www.allice.de
Allice Messtechnik GmbH
