Getting Started
R&S
®
ZNL/ZNLE
75
User Manual 1178.5966.02 ─ 19
See
Chapter 6.2, "Storing and recalling instrument settings and measurement data"
Undo
Reverts last operation, i.e. the status before the previous action is retrieved.
The undo function is useful, for example, if you are performing a zero span measure-
ment with several markers and a limit line defined and accidentally select a different
measurement. In this case, many settings would be lost. However, if you press [UNDO]
immediately afterwards, the previous status is retrieved, i.e. the zero span measure-
ment and all settings.
Note:
The [UNDO] function is not available after a [PRESET] or "Recall" operation.
When these functions are used, the history of previous actions is deleted.
Redo
Repeats previously reverted operation
Zoom mode
Displays a dotted rectangle in the diagram that can be expanded to define the zoom
area.
Multiple zoom mode
Multiple zoom areas can be defined for the same diagram.
Zoom off
Displays the diagram in its original size.
SmartGrid
Activates "SmartGrid" mode to configure the screen layout.
For Spectrum mode only, see the R&S
ZNL/ZNLE Spectrum Mode user manual.
Sequencer
Opens the "Sequencer" menu to perform consecutive measurements.
See
Chapter 5.4, "Running a sequence of measurements"
Gen On/Off
Enables/disables the independent CW source. Requires the option R&S
ZNL/ZNLE-
K14.
Gen Config
Opens the dialog box to configure the independent CW source. Requires the option
R&S
ZNL/ZNLE-K14.
Help (+ Select)
Allows you to select an object for which context-specific help is displayed
See
Help
Displays context-sensitive help topic for the most recently selected element
Operating the instrument
