Remote Commands
R&S
®
ZNH
318
User Manual 1334.5985.02 ─ 02
STATus:QUEStionable:FREQuency:CONDition?
This command reads out the CONDition section of the QUEStionable register.
The command does not delete the contents of the EVENt section.
Usage:
Query only
STATus:QUEStionable:LIMit:CONDition?
This command reads out the CONDition section of the QUEStionable register.
The command does not delete the contents of the EVENt section.
Usage:
Query only
STATus:QUEStionable:POWer:CONDition?
This command reads out the CONDition section of the QUEStionable register.
The command does not delete the contents of the EVENt section.
Usage:
Query only
STATus:QUEStionable:ENABle
<DecimalValue>
This command controls the ENABle part of the QUEStionable register.
The ENABle part allows true conditions in the EVENt part of the status register to be
reported in the summary bit. If a bit is 1 in the enable register and its associated event
bit transitions to true, a positive transition will occur in the summary bit reported to the
next higher level.
Parameters:
<DecimalValue>
Range:
0 to 65535
STATus:QUEStionable:FREQuency:ENABle
<DecimalValue>
This command controls the ENABle part of the QUEStionable register.
The ENABle part allows true conditions in the EVENt part of the status register to be
reported in the summary bit. If a bit is 1 in the enable register and its associated event
bit transitions to true, a positive transition will occur in the summary bit reported to the
next higher level.
Parameters:
<DecimalValue>
Range:
0 to 65535
STATus:QUEStionable:LIMit:ENABle
<DecimalValue>
This command controls the ENABle part of the QUEStionable register.
Remote Control - Commands
