Command reference
R&S
®
ZNB/ZNBT
1405
User Manual 1173.9163.02 ─ 62
Example:
See
SYSTem:COMMunicate:RDEVice:SMATrix:
Manual operation:
See
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:CONFigure:MVNA
{<MatrixVNAPort>, <VNAPort>}
Sets/gets the RF connections between switch matrix and VNA as a comma-separated
list of port numbers.
Note:
a manual RF connection configuration must be performed within a transaction,
enclosed by the commands
SYSTem:COMMunicate:RDEVice:SMATrix:
SYSTem:COMMunicate:RDEVice:SMATrix:CONFigure:
. The modified configuration will not be applied until the end of this transaction.
Suffix:
<Matr>
.
Configuration index of the switch matrix (see
COMMunicate:RDEVice:SMATrix<Matr>:DEFine
Setting parameters:
{<MatrixVNAPort>
Number of the switch matrix VNA port
Range:
1 ... # of VNA ports of the switch matrix
<VNAPort>}
Number of the VNA port
Range:
1 ... # of RF ports of the VNA
Example:
See
SYSTem:COMMunicate:RDEVice:SMATrix:
Manual operation:
See
"Edit Matrix VNA Port Connections"
SYSTem:COMMunicate:RDEVice:SMATrix:COUNt?
Gets the number of configured switch matrices (see
Usage:
Query only
Manual operation:
See
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:DEFine
<Unused>, <Driver>,
<Interface>, <Address>
This command allows
●
to configure (i.e. register) a new switching matrix
●
to modify the (management) connection settings of an already configured switching
matrix
●
to get the (management) connection settings of a configured switching matrix
SCPI command reference