Maintenance and disposal
R&S
®
ZNA67EXT
50
Getting Started 1179.6295.02 ─ 02
The R&S
ZNA67EXT has to be considered a system. For recalibration and
repair, all shipped components and cables must be sent to the Rohde &
Schwarz service. See
.
●
Observe the label on the rear panel of the R&S
ZNA67, to ensure you
include the correct test sets in your shipment. See
●
Also include additional cable sets ordered with the system. See
10.4
Storing and packing
The R&S
ZNA67EXT network analyzer unit and the external test sets can be
stored in the temperature range quoted in the data sheet. When stored for a lon-
ger period of time, the devices must be protected against dust.
Transport and store the external test sets in their original boxes. The 1
mm test
port of the diplexer must be protected by its cap; see also
.
10.5
Disposal
Rohde
&
Schwarz is committed to making careful, ecologically sound use of natu-
ral resources and minimizing the environmental footprint of our products. Help us
by disposing of waste in a way that causes minimum environmental impact.
Disposing electrical and electronic equipment
A product that is labeled as follows cannot be disposed of in normal household
waste after it has come to the end of its service life. Even disposal via the munici-
pal collection points for waste electrical and electronic equipment is not permitted.
Figure 10-1: Labeling in line with EU directive WEEE
Rohde
&
Schwarz has developed a disposal concept for the eco-friendly disposal
or recycling of waste material. As a manufacturer, Rohde
&
Schwarz completely
Disposal