manualshive.com logo in svg

R&S VTE, Getting Started

Share
Download
R&S VTE Getting Started Download Page 7

Safety and Regulatory Information

R&S

®

VTE

7

Getting Started 2116.1270.02 ─ 07

1

 

Safety and Regulatory Information

The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the 

Chapter 1.1, "Safety Instructions"

,

on page 7.

Intended use

The product is intended for the development, production and verification of elec-
tronic components and devices in industrial, administrative, and laboratory envi-
ronments. Use the product only for its designated purpose. Observe the operating
conditions and performance limits stated in the data sheet.

Where do I find safety information?

Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:

●

In 

Chapter 1.1, "Safety Instructions"

, 

on page 7. The same information is

provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.

●

Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.

1.1

 

Safety Instructions

Products from the Rohde

 

&

 

Schwarz group of companies are manufactured

according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.

Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
sheet, manuals and the printed safety instructions. If you are unsure about the
appropriate use, contact Rohde

 

&

 

Schwarz customer service.

Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.

Safety Instructions

Summary of Contents for VTE





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands