R&S UPZ
Putting into Operation
Connection to the Test Setup
Operating Manual 1120.8610.14 - 0
5
18
Windows 7:
The procedure is described in one of the two following sections, depending on which
operating system is installed.
Before installing the USB driver, you must connect the R&S UPZ to the audio analyzer,
as described under "
1.4.7 Connection to the R&S UPP
".
1.4.4.1 Installation on the R&S UPP/UPV with Windows XP Operating System
The USB driver for the R&S UPZ is included in the R&S UPP/UPV as of firmware
version 3.2.0.
When connecting the R&S UPZ to the R&S UPP/UPV for the first time, the "Found
New Hardware Wizard" asks for the driver.
