Startup
R&S
®
UPV
7
Getting Started 1146.2078.62 ─ 09
2 Startup
The R&S UPV audio analyzer is available in two models. The R&S UPV standard
model and an R&S UPV66 model which is specifically designed for use in systems and
has no display, no front panel controls and no CD/DVD drive. Except for the operation
via front panel, the R&S UPV66 variant is largely identical to the standard model with
respect to functionality. This manual therefore describes both instruments in parallel,
and any differences are indicated at the appropriate points in the text.
This chapter describes the controls and ports of the R&S audio analyzer UPV based
on the front and rear view and shows how to put the instrument into operation. It also
describes the connection of peripherals such as printer, keyboard, mouse and monitor.
Specifications for the interfaces can be found in the data sheet.
The introduction to
chapter 3.1, "Introduction - Getting Started"
an overview of the functions and the operating concept of the audio analyzer. Detailed
operating instructions and an overview of the menus are provided in
The CD-ROM contains the entire manual complete with the other chapters in printable
PDF format: The individual menus and functions of the instrument including the associ-
ated remote-control commands are explained in detail in the reference section of chap-
ter "Device Functions." Basic information on remote control of the instrument is provi-
ded in the chapters "Remote Control - Fundamentals" and "Remote Control - Com-
mands". A detailed description of the instrument interfaces can be found in the chapter
"Maintenance and Interfaces".
The audio analyzer has the Windows XP
®
operating system. No special knowledge of
the operating system used is required for operating the instrument.
Basic PC knowledge, such as what a file, a directory, etc. is, or how data is transferred
using Windows Explorer
®
is assumed and, therefore, not discussed in any detail.
The R&S UPV audio analyzer can be fully operated via the controls on the front panel.
It is, however, also possible to operate the instrument using an external keyboard and
mouse. Operation follows the same basic rules which apply to other Windows pro-
grams in use today. It is also assumed that users are familiar with these basic rules.
This information is therefore not specified in detail here.
The R&S UPV66 model does not feature a front panel keyboard and has no display or
CD/DVD drive; but similar to the R&S UPV standard model, it can be operated by
means of a keyboard or mouse after an external monitor is connected.
2.1 Description of Front View
This section provides an overview of the controls and ports on the front of the
R&S
UPV/R&S
UPV66.
Description of Front View