Manual Operation
R&S
®
UPV
150
Getting Started 1146.2078.62 ─ 09
Function
Front panel
Computer keyboard
Mouse
Open parameter list
Rotary-knob click or
press the ENTER key.
Press the Enter key.
Click button.
Scroll
Move the displayed sec-
tion of the list using the
rotary knob or up/down
cursor keys.
Move the displayed sec-
tion of the list using the
up/down cursor keys.
Activate the UP or
DOWN button in the
scrollbar until the desired
entry is displayed.
Select parameter
Highlight the selection
using the rotary knob or
up/down cursor keys and
confirm with a rotary-
knob click or the ENTER
key.
Highlight the selection
using the up/down cur-
sor keys and press the
Enter key.
Click parameter.
Exit the parameter list
without adopting a set-
ting
Press ESC key.
Press the ESC key.
Click anywhere outside
parameter list.
4.7.9 Numeric Entries – Numeric Entry Fields
Numeric values (e.g. the output voltage) can be entered or edited in these fields.
This can be done is various ways. However, the following applies irrespective of the
chosen method:
Entries outside the possible value range are not accepted; an audible warning is
issued and the entry is changed to its permissible minimum or maximum value. The
possible value range is displayed above the softkey bar.
4.7.9.1
Value Inputs in Edit mode – Green Selection Frame
When the focus is moved to a numeric entry field, the system enters Edit mode, which
is indicated by a green selection frame. In addition, the current numeric value is high-
lighted with a blue background.
If a completely new value is to be entered, simply begin entering digits using the
numeric keypad on the front panel or external computer keyboard; the old value is
deleted automatically when the first key is pressed. The digit to the left of the cursor
can be deleted at any time during entry using the UNDO key.
If only certain digits are to be changed, position the cursor accordingly using the cursor
keys or digit cursor and enter the new digits (if the position of the digit cursor is
changed before the first digit is entered, the old value will not be deleted). The default
setting is insert mode. It is only possible to change between insert and overwrite mode
if an external computer keyboard is used.
The numeric entry field is closed with:
●
ENTER
The newly entered value is adopted.
Settings in the Panels