R&S TSMA6 User Manual Download

Page: 55 / 155

Update and Restore

R&S

TSMA6

User Manual 4900.8057.02 ─ 06

9. Finally, when all firmware/software packages are installed, a restart is executed.

10. When the R&S TSMAx firmware comes up again, the mainboard firmware is upda-

ted.

Note:

Step

step 10

and

step 11

are only performed during firmware update, if the

firmware package contains a new mainboard firmware.
The following dialog appears:

The mainboard flash is indicated like following:

● Meas LED = red
● Mode LED = off
● Fans are switched on

11. After the flash of the mainboard firmware, the device switches off hard and reboots.

12. The firmware/software installation has finished, when the LEDs display the follow-

ing state.
Mode LED = green resp. blue (depends on the state of the WLAN access point)

13. Reload the web GUI and verify the displayed firmware/software version in the

"Overview" menu. The installed version needs to be indicated.

The R&S

TSMA6 is ready for operation.

7.1.2.2

Remote Installation of the Setup File

1. Copy the setup file.

a) For firmware installation:

Copy the firmware setup file

TSMAx-Setup-<Version>.exe

into a tempo-

rary directory on the remote PC.

b) For software installation:

Copy the corresponding setup file into a temporary directory on the remote PC.

2. Establish a LAN respectively WLAN connection between the remote PC and the

R&S

TSMA6.

Firmware Update

Summary of Contents for TSMA6




























































































































































Search results

Summary of Contents for TSMA6

Reviews:

Related manuals for TSMA6

Brands by name

Popular brands

R&S TSMA6, User Manual

Search results

Summary of Contents for TSMA6

Reviews:

Related manuals for TSMA6

Brands by name

Popular brands