R&S TSMA6, User Manual

Page: 32 / 155

Configuring the R&S TSMA6
R&S
®
TSMA6
32 User Manual 4900.8057.02 ─ 06
6 Configuring the R&S TSMA6
6.1 Accessing the R&S TSMA6
There are different ways to control measurements on the R&S TSMA6.
●
Local operation
To use the R&S
TSMA6 as an ordinary PC, an external monitor, mouse and key-
board have to be connected to the R&S TSMA6.
●
Remote access
The remote access to the R&S
TSMA6 can be realized via the following options.
– Using the web GUI of the R&S TSMA6 (see Chapter 6.1.1, "Start the
R&S TSMA6 Web GUI" , on page 32).
– Establish a remote desktop connection (via LAN/WLAN) (see Chapter 6.1.2,
"Establish a Remote Desktop Connection" , on page 33).
6.1.1 Start the R&S TSMA6 Web GUI
To start the R&S TSMA6 web GUI via a remote PC, three possible ways are available.
WLAN
1. Via a tablet or smartphone, you have to establish a WLAN connection to
R&S TSMA6 WLAN access point.
a) Search for a TSMA6 WLAN network. The WLAN access point on the
R&S TSMA6 starts automatically by default during the boot process of the
device.
NOTE: This behavior can be switched off (see Chapter A.2.2.3, "WLAN AP" ,
on page 127).
b) Connect your tablet or smartphone with the TSMA6 WLAN network. The
required login information can be found on a label on the bottom side of the
R&S
TSMA6.
WLAN-Access point SSID: default TSMA6-xxxxxx (xxxxxx is the serial number
of this specific R&S TSMA6)
Default key: instrument
Note :
The SSID and the key are configurable via the web GUI (see Chapter A.2.2.2,
"WLAN" , on page 126).
The WLAN connection between the tablet or smartphone and the R&S TSMA6
device is established.
2. On the tablet or smartphone, start a web browser and enter the following URL:
http://192.168.137.1/
The configuration web GUI of the R&S TSMA6 is started.
Accessing the R&S TSMA6