Preparing for use
R&S
®
SZM
17
Manual 1179.3967.02 ─ 02
Figure 5-1: Positions for mounting the adjustable feet
Connect the R&S
SZM to the other devices in the test setup as described in
Chapter 5.10, "Completing the test setup"
5.4
Considerations for test setup
Cable selection and electromagnetic interference (EMI)
Electromagnetic interference (EMI) can affect the measurement results.
To suppress electromagnetic radiation during operation:
●
Use high-quality shielded cables for the following connector types:
– SMA: RF cables that match this connector type.
Chapter 5.8, "Connecting to RF In"
– USB: double-shielded USB cables. The length of passive USB cables
must not exceed 1
m.
Chapter 5.7, "Connecting to USB"
●
Always terminate open cable ends.
Considerations for test setup
