Overview
Overview of the Front
2-6
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
2.2.2 Hard Disk Tray
The hard disk tray contains the hard disks and is the main storage of the
R&S system. To prevent data loss in case a hard disk fails, it is RAID pro-
tected.
Once the faceplate is removed (see section “Faceplate” on page 2-4),
you have access to the hard disk trays:
Figure 2-3: Hard disk tray
Each hard disk of the array is connected to the system with the help of
a disk carrier which makes the removal of a hard disk from the system
easy.
Further information about RAID can be found in section “Introduction to
RAID” on page 5-2.
Pulling out two trays at the same time
When pulling out two trays at the same time, there might be an
overweight at the front of the system and a risk of damaging it.
Pull out one tray only and slide it back in the system before
pulling out the second tray.
hard disk
hard disk tray