Receiver Type and Position
Satellite Navigation
44
User Manual 1178.6379.02 ─ 01
Location Coordinates, Position Format
In the ECEF coordinate system, a geographic location is identified by three coordi-
nates, the altitude, latitude and longitude. The last two can be displayed in decimal or
DMS format. The display format is determined by the parameter "Position Format".
Parameter
Description
"Position Format"
Sets the format in which the Latitude and Longitude are displayed.
●
"DEG:MIN:SEC"
The display format is Degree:Minute:Second and Direction, i.e.
XX°XX'XX.XX" Direction
, where direction can be North/South and
East/West.
●
"Decimal Degree"
The display format is decimal degree, i.e.
+/-XX.XXXXX°
, where "+"
indicates North and East and "-" indicates South and West.
"Altitude"
Sets the geographic altitude of the reference location in meters above sea
level.
The simulated altitude is the height above the ellipsoid (HAE) altitude.
"Latitude"
Sets the latitude of the reference location.
"Longitude"
Sets the longitude of the reference location.
The altitude, latitude and longitude are configurable if
> "User
Defined".
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:
FORMat
To enter the coordinates in Degree:Minute:Second format
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:DMS:
PZ
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:
DMS[:WGS]
To enter the coordinates in decimal degree format
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:
DECimal:PZ
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:LOCation:COORdinates:
DECimal[:WGS]
Attitude Behaviour, More
Option: R&S
SMW-K108
Defines how the attitude information is defined.
To define the attitude parameters in all cases, select "More", see
"Constant"
Receiver's attitude is set as the combination of the "Yaw/Heading",
"Pitch/Elevation", "Roll/Bank" values.
The resulting attitude is a constant value.
"Spinning"
Enables a constant rate of change of the roll, as set with the parame-
ter
Static Receiver
