background image

Metra. The World’s Best Kits.

®

 

MetraOnline.com 

© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION 

REV. 10/15/19 INST108-GM1G

I N S TA L L AT I O N I N S T R U C T I O N S

108-GM1G

Attention!

  

Let the vehicle sit with the key 

out of the ignition for a few minutes before 

removing the factory radio. When testing the 

aftermarket equipment, ensure that all factory 

equipment is connected before cycling the  

key to ignition.

Patent Pending

KIT FEATURES

•  Designed specifically for the Pioneer DMH-C5500NEX 8-inch radio
•  Painted gunmetal gray

KIT COMPONENTS

• A) Radio trim panel • B) Radio chassis brackets • C) Radio display brackets • D) Phillips screws (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver  
• 9/32” socket wrench • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2
Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: Please visit metraonline.com 

for wiring harness options
Antenna Adapter: 40-EU55

A

B

C

D

Chevrolet 

Silverado / 

GMC

 Sierra 

2014-up

Visit 

MetraOnline.com

 for more detailed information about the product and up-to-date  

vehicle specific applications

APPLICATIONS
Chevrolet

Silverado 1500.................2014-2018

Silverado 2500/3500..........2015-up

Silverado 1500 LD.....................2019

GMC

Sierra 1500.......................2014-2018

Sierra 2500/3500................2015-up

Sierra 1500 Limited...................2019

Summary of Contents for 108-GM1G









Reviews: