Preparing for Use
R&S
®
SMM100A
22
Getting Started 1179.1335.02 ─ 02
Type
Torque limit
Nut opening
2.92 mm
8
0.9
5/16
8
2.4 mm
8
0.9
5/16
8
1.85 mm
8
0.9
5/16
8
1.0 mm
3
0.34
0.236
6
To prevent RF output switch-off
►
NOTICE!
If you set a too high output level without a load connected to the
instrument, the reverse power can exceed a limit forcing the R&S
SMM100A
to switch off the RF output.
Connect a load with sufficient return loss as given in the data sheet.
3.10
Connecting to LO In/Out
"LO In/Out" connectors are Subminiature Version A (SMA) connectors.
The connector is located on the
"To connect to screwable connectors "
See also chapter "Local Oscillator Coupling" in the user manual.
3.11
Connecting to Ref In/Ref Out
The connector is located on the
To connect to "Ref In"/"Ref Out" (reference < 1
GHz)
For connection, the R&S
SMM100A provides BNC connectors.
"To connect to non-screwable connectors (BNC)"
To connect to Ref In/Ref Out (reference = 1
GHz)
For connection, the R&S
SMM100A provides SMA connectors.
Connecting to Ref In/Ref Out
Summary of Contents for SMM100A
