R&S SMJ100A, Operating Manual, Page: 721 / 874

Remote Control Commands
R&S
®
SMJ100A
705 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
The ASCII files are stored with the fixed file extensions
*.txt
or
*.csv
in a directory
of the user's choice. The directory applicable to the commands is defined with the com-
mand
MMEMory:CDIR
. A path can also be specified in command
SOUR:CORR:DEXC:AFIL:SEL
, in which case the files are stored or loaded in the
specified directory.
Parameters:
<Filename> <ascii file name>
Example: CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL 'D:\user\import_ucor.csv'
selects that ASCII file
ucor.csv
is imported.
CORR:DEXC:SEL 'D:\user\import_ucor_imp'
selects that the ASCII file
ucor.csv
is imported into user cor-
rection list
ucor_imp
.
Manual operation: See "Select ASCII Source / Destination - User Correction"
on page 228
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST:
COMMa
Example: CORR:DEXC:MODE EXP
selects that the user correction list is exported into an ASCII file.
CORR:DEXC:AFIL:SEL 'D:\user\import_ucor.csv'
selects ASCII file ucor.csv as destination for the user correction
list data.
CORR:DEXC:AFIL:SEP:COL TAB
the pairs of frequency and level values are separated by a tabu-
lator.
CORR:DEXC:AFIL:SEP:DEC DOT
selects the decimal separator dot.
CORR:DEXC:SEL 'D:\user\import_ucor_imp'
selects that the user correction list ucor_imp is imported into
ASCII file ucor.csv.
Manual operation: See "Column Separator- User Correction" on page 227
SOURce Subsystem