R&S SMJ100A, Operating Manual

Page: 244 / 874

Instrument Function
R&S
®
SMJ100A
228 Operating Manual 1403.7458.32 ─ 14
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 705
Select ASCII Source / Destination - User Correction
Calls the "File Manager" for selecting the ASCII file to be imported into a user correc-
tion list (source) or the ASCII file the user correction list is exported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect
on page 705
Destination / Source - User Correction
Calls the "File Manager" for selecting the user correction list to be exported (source)
into an ASCII file or the destination for the ASCII file to be imported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:SELect
on page 707
Import / Export - User Correction
Starts the export or import of the selected file.
When import is selected, the ASCII file is imported as user correction list.
When export is selected, the user correction list is exported into the selected ASCII file.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:EXECute
on page 706
5.5.8.2 Filling the Correction List automatically
The "Fill Table" menu enables you to automatically set the level correction values.
The start line and the number of rows to be filled are defined under "From" and
"Range."
The column to be filled is selected under "Select column to fill". Depending on the
selection here, the default for start, end, and increment value are set. As the settings
are interdependent, a change of one parameter may result in the automatic change of
one or more of the other parameters. The filling of the column with the selected value
settings is started with button "Fill".
RF Signal and Analog Modulations - RF Block