Remote Control Commands
R&S
®
SMJ100A
689
Operating Manual 1403.7458.32 ─ 14
Example:
BB:MCCW:TRIG:OUTP:DEL:FIX ON
restricts the marker signal delay setting range to the dynamic
range.
BB:MCCW:TRIG:OUTP:DEL:MIN
queries the minimum of the dynamic range.
Response:0
the minimum for the marker delay setting is 0 samples.
Usage:
Query only
Manual operation:
See
"Current Range without Recalculation"
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:MODE
<Mode>
Defines the signal for the selected marker output.
Parameters:
<Mode>
RESTart | PULSe | PATTern | RATio
RESTart
A brief marker signal is generated at the start of the waveform.
PULSe
A pulsed marker signal is generated. The pulse frequency (=
sample rate/divider) is defined with the
SOUR:BB:MCCW:TRIG:OUTP:PULSe:DIVider
command and
can be queried with the
SOUR:BB:MCCW:TRIG:OUTP:PULSe:FREQuency?
command.
PATTern
A marker signal is generated with the aid of a user-definable bit
pattern. The bit pattern is entered with the aid of command
SOURce:BB:MCCW:TRIGger:OUTPut:PATTern
. The bit pat-
tern is a maximum of 32 bits long.
RATio
A regular marker signal corresponding to the Time Off / Time On
specifications in the commands
SOURce:BB:MCCW:TRIGger:OUTPut:OFFT
and
SOURce:BB:MCCW:TRIGger:OUTPut:ONT
is generated.
*RST:
RESTart
Example:
BB:MCCW:TRIG:OUTP2:MODE PULS
selects the pulsed marker signal on output MARKER 2.
Manual operation:
See
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:OFFTime
<OffTime>
[:SOURce<hw>]:BB:MCCW:TRIGger:OUTPut<ch>:ONTime
<OnTime>
Sets the number of samples in a period (ON time + OFF time) during which the marker
signal in setting
SOURce:BB:MCCW:TRIGger:OUTPut:MODE RATio
on the marker
outputs is ON.
SOURce Subsystem
Summary of Contents for SMJ100A
