R&S SMJ100A, Operating Manual

Page: 656 / 874

Remote Control Commands
R&S
®
SMJ100A
640 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<ExtTimeDelay> float
Range:
0 to 688
Increment: 250E-12
*RST:
0
Example: see
[:SOURce<hw>]:BB:DM:TRIGger:DELay:UNIT
on page 639
Manual operation: See "Trigger Delay" on page 364
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelay> float
Range:
0 to 688
Increment: 250E-12
*RST:
0
Example: see
[:SOURce<hw>]:BB:DM:TRIGger:DELay:UNIT
on page 639
Usage: Query only
Manual operation: See "Actual Trigger Delay" on page 365
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal<ch>]:INHibit <Inhibit>
Sets the number of symbols by which a restart is to be inhibited following a trigger
event. This command applies only in the case of external triggering.
Parameters:
<Inhibit> integer
Range:
0 to 67108863
*RST: 0
Default unit: symbol
Example: BB:DM:TRIG:SOUR EXT
selects an external trigger
BB:DM:TRIG:INH 200
sets a restart inhibit for 200 symbols following a trigger event.
Manual operation: See "Trigger Inhibit" on page 365
SOURce Subsystem