R&S SMJ100A, Operating Manual

Page: 648 / 874

Remote Control Commands
R&S
®
SMJ100A
632 Operating Manual 1403.7458.32 ─ 14
Manual operation: See "Symbol Rate" on page 345
[:SOURce<hw>]:BB:DM:STANdard <Standard>
Selects the standard.
After selection, modulation parameters "Modulation Type" (
:BB:DM:FORMat
), "Symbol
Rate" (
:BB:DM:SRATe
), "Filter" (
:BB:DM:FILTer:TYPE
and
:BB:DM:FILTer:PARameter:...
) and "Coding" (
:BB:DM:CODing
) are auto-
matically set in accordance with the standard.
The
USER
parameter cannot be set. A query returns this value if a user-defined Cus-
tom Dig Mod setting was loaded or if one of the associated settings was changed sub-
sequent to the selection of a standard. The user defined settings are stored and loaded
with commands
:BB:DM:STAN:ULIS:...
(see "DM Lists" on page 654).
Parameters:
<Standard> USER | BLUetooth | DECT | ETC | GSM | GSMEdge | NADC |
PDC | PHS | TETRa | W3GPp | TDSCdma | CFORward |
CREVerse | WORLdspace | TFTS | APCOPH1C4fm |
APCOPH1CQpsk | APCOPH2HCpm | APCOPH2HDQpsk |
APCOPH2HD8PSKW | APCOPH2HD8PSKN | APCOPH1Lsm |
APCOPH1Wcqpsk
*RST:
GSM
Example: BB:DM:STAN DECT
selects digital modulation according to the DECT standard.
Manual operation: See "Set acc. to Standard" on page 343
[:SOURce<hw>]:BB:DM:STATe <State>
Enables/disables digital modulation. Switching on digital modulation turns off all the
other digital standards in the same signal path.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: SOURce1:BB:DM:STATe ON
Manual operation: See "State" on page 340
[:SOURce<hw>]:BB:DM:SWITching:SOURce <Source>
Selects the source of the CW control signal for switching between a modulated and an
unmodulated signal.
SOURce Subsystem