Instrument Function
R&S
®
SMJ100A
343
Operating Manual 1403.7458.32 ─ 14
"Data List ...,
Select Data"
Data lists will be used.
Data lists can be generated internally in the data editor or externally.
Data lists are selected in the "File Select" window, which is called by
means of the "Select Data" button.
The "File" "Manager" is used to transmit external data lists to the
R&S
SMJ, and can be called within every "File" Select window by
means of the "File" "Manager" button.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect
"External
Serial"
External serial data is supplied via the DATA connector.
"External Par-
allel (AUX I/O)"
External parallel data is supplied externally via the PARDATA pins on
the AUX I/O interface.
Remote command:
List Management
Calls the menu for managing data and control lists (see
Remote command:
n.a.
Standard, Symbol Rate, Coding
The middle part of the menu is used for selecting the standard, the symbol rate and the
coding.
Set acc. to Standard
Selects a standard.
After selection, modulation parameters "Modulation Type", "Symbol Rate", "Filter" and
"Coding" are automatically set in accordance with the standard.
If one of these parameters is subsequently altered, the display changes to User. The
User setting can be saved to a file so that it can be recalled at some later time ("Save/
Recall User.." button).
The following table shows the standards that are available, together with the associ-
ated settings of the modulation parameters.
Baseband Signal - Baseband Block
Summary of Contents for SMJ100A
