R&S SMJ100A, Operating Manual

Page: 410 / 874

Instrument Function
R&S
®
SMJ100A
394 Operating Manual 1403.7458.32 ─ 14
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:Q
on page 594
Generate Signal HD
Generates a signal and saves it to a file.
The File Select window opens automatically and the signal can be stored as a wave-
form file.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate:NAMed
on page 594
Generate Signal RAM
Generates a signal and uses it as output straight away.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:CIQ:CREate
on page 593
5.8.3.3 Multi Segment Waveforms
Modern chip technologies implement several communication standards within one chip
and rise spacial verification and test requirements. To fulfill the requirements of these
test systems and to enable rapid alternation between different waveforms with differing
test signals, the R&S
SMJ provides the functionality to generate multi segment wave-
form files.
This section introduces the concept of the multi segment waveform files, together with
description of the provided settings and some typical configuration examples.
Required options
Multi segment waveform files require the corresponding Digital Standard options
(R&S
SMJ-K2xx) of all included standards.
Introduction
A multi segment waveform is a composed signal containg several multiple independent
waveforms called segments. Each segment represents a completely independent
waveform that can be output with its own marker and clock settings.
The Figure 5-27 shows the principle of building a multi segment waveform.
Baseband Signal - Baseband Block