R&S SMJ100A, Operating Manual

Page: 404 / 874

Instrument Function
R&S
®
SMJ100A
388 Operating Manual 1403.7458.32 ─ 14
Execute Next Segment
Triggers manually switchover to the subsequent segment in the mutli segment file. A
manual trigger can be executed only when an internal "Next Segment Source" has
been selected.
To perform a switchover to any segment within the multi segment file, adjust the
parameter "Next Segment".
This parameter is disabled, if a sequencing play list is enabled.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:EXECute
on page 627
Sequencing List
Open a dialog box for defining the “play lists” (see "Multi Segment Waveform Sequenc-
ing" on page 407).
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect
on page 628
Trigger Example
Displays an example of a multi segment waveform. The currently enabled trigger and
next segment mode are considered. After the instrument switch on, the graph of the
last loaded waveform is displayed.
Note: The curves plotted in this dialog box are textbook examples, "not measured"
waveforms. They are intended to visualize the trigger and next segment settings more
clearly.
Remote command:
n.a.
Marker Mode
Provides the settings necessary to define the marker output signal for synchronizing
external instruments.
Marker Mode
Marker configuration for up to 4 marker channels. The settings are used to select the
marker mode defining the shape and periodicity of the markers. The contents of the
dialog change with the selected marker mode; the settings are self-explanatory.
Note: The marker trace in the waveform file remains unchanged. It is not overwritten,
even if something else than "Unchanged" has been selected.
All regular marker signals are described in
"Marker Modes" on page 324.
"Unchanged" The marker signal remains unchanged as defined in the waveform
file.
"Restart" A marker signal is generated at the start of each ARB sequence.
This marker mode is not enabled for muti segment waveforms.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:MODE
on page 591
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PULSe:DIVider
on page 592
Baseband Signal - Baseband Block