R&S SMCVB-K164, User Manual

Page: 42 / 152

DVB-T2 Configuration and Settings
R&S
®
SMCVB-K164
42 User Manual 1179.0974.02 ─ 02
Note:
The value of L
Data
depends on the following parameters:
●
"Guard Interval" on page 40
●
"FFT Size" on page 40
●
"T2 Frame Duration (T
F
)" on page 55
The maximum allowed T2 frame duration is 250 ms
The number of P2 symbols in a T2 frame depends on the "FFT Size".
Remote command:
[:SOURce<hw>]:BB:T2DVb:LDATa
on page 108
Subslices per T2 Frame (N_SUB)
Sets the number of subslices per T2 frame.
The set value depends on the constellation and the FEC type of all data type 2 PLP s.
"1" Fixed setting for single PLP.
"1" to "6480" Configurable setting for multi-PLP.
Remote command:
[:SOURce<hw>]:BB:T2DVb:NSUB
on page 108
4.6 System Settings
Access:
► Select "Baseband > DVB-T2 > System".
The dialog provides settings necessary to configure DVB-T2 system parameters.
Settings:
● Network Settings .....................................................................................................43
● L1 Settings .............................................................................................................. 47
● ID Settings ...............................................................................................................49
System Settings