Remote-Control Commands
R&S
®
SMCVB-K161
52
User Manual 1179.1035.02 ─ 02
SOURce1:BB:ATSM:USEFulf:RATE?
// 400.000000 MBit/s
SOURce1:BB:ATSM:INPut:DATArate?
// 399.876543 MBit/s
********************************************************************************
// Query properties of internal TS player input signals.
********************************************************************************
SOURce1:BB:ATSM:SOURce TSPL
SOURce1:BB:ATSM:USEFulf:RATE:MAX?
// 19.392659 MBit/s
SOURce1:BB:ATSM:USEFulf:RATE?
// 17.654321 MBit/s
For configuring IP channel settings and local IP data network parameters, see:
●
●
Commands
[:SOURce<hw>]:BB:ATSM:PACKetlength?
......................................................................... 52
[:SOURce<hw>]:BB:ATSM:USEFul[:RATE]?
....................................................................... 52
[:SOURce<hw>]:BB:ATSM:USEFul[:RATE]:MAX?
............................................................... 53
[:SOURce<hw>]:BB:ATSM[:INPut]:DATarate?
..................................................................... 53
[:SOURce<hw>]:BB:ATSM:PACKetlength?
Queries the packet length of the external transport stream in bytes.
Return values:
<PacketLength>
P188 | P208 | INValid
P188|P208
188/208 byte packets specified for serial input and parallel input.
INValid
Packet length does not match the specified length.
*RST:
INValid
Example:
See
Example "Querying input signal properties"
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:BB:ATSM:USEFul[:RATE]?
Queries the data rate of useful data r
useful
of the external transport stream. The data
rate is measured at the input of the installed input interface.
Input Signal Commands
