R&S SMCVB-K156, User Manual

Page: 56 / 79

Remote-Control Commands
R&S
®
SMCVB-K156
56 User Manual 1179.1029.02 ─ 02
[:SOURce<hw>]:BB:INPut:IP<ch>:ALIas <Alias>
Specifies an alias, i.e. name for the IP connection.
Parameters:
<Alias> string
Example: See Example "Configure IP channel 2 properties" on page 55.
Manual operation: See "Alias" on page 24
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT <Port>
Sets the port of the input IP data at the "IP Data" connector.
Parameters:
<Port> integer
Range:
0 to 65535
*RST: 6002
Example: See Example "Configure IP channel 2 properties" on page 55.
Manual operation: See "Port" on page 25
[:SOURce<hw>]:BB:INPut:IP<ch>:TYPE <Type>
Sets the IP input type.
Parameters:
<Type> UNIcast | MULTicast
UNIcast
Analyzes all unicast IP packets that arrive at the specified port.
See
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT
on page 56.
MULTicast
When an IP address is in the multicast address range, an
attempt is made to join a multicast group using
IGMP . Set multi-
cast address and port.
See:
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
on page 56
[:SOURce<hw>]:BB:INPut:IP<ch>:PORT
on page 56
*RST: UNIcast
Example: See Example "Configure IP channel 2 properties" on page 55.
Manual operation: See "Type" on page 24
[:SOURce<hw>]:BB:INPut:IP<ch>:MULticast:ADDRess
Sets the destination IP address (IPv4) of the IP connection.
Input Commands