R&S SMCVB-K156, User Manual

Page: 21 / 79

T-DMB/DAB Configuration and Settings
R&S
®
SMCVB-K156
21 User Manual 1179.1029.02 ─ 02
"ETI (NA 5592)"
ETI NA 5592 signal.
"ETI (NA 5376)"
ETI NA 5376 signal.
Remote command:
[:SOURce<hw>]:BB:TDMB:ETIinput?
on page 51
Number of Streams
Displays the number of streams contained in the ETI signal.
The signal can contain up to 64 streams. If the ETI signal is invalid, the number of
streams is "0".
Remote command:
[:SOURce<hw>]:BB:TDMB:NST?
on page 52
Mode Identity (MID)
Displays the DAB mode identity.
The MID information in the ETI data stream determines the transmission mode.
Remote command:
[:SOURce<hw>]:BB:TDMB:MID?
on page 52
4.2.2 Info
Access:
► Select "Input Signal > Info".
The tab displays the STC and SSTC information on the input signal.
Settings:
Info ................................................................................................................................ 21
└ Subchannel Id (Hex) ....................................................................................... 22
└ Protection Profile .............................................................................................22
└ Protection Level .............................................................................................. 22
└ Data Rate / kbit/s ............................................................................................ 22
Info
The table displays individual parameters for each subchannel. The subchannels range
from 1 to Number of Streams, see
" Number of Streams " on page 21.
STC / SSTC parameters are "Subchannel Id (Hex)", "Protection Profile", "Protection
Level" and "Data Rate / kbit/s".
Input Signal Settings