Preparing for Use
R&S
®
SMB100A
47
Operating Manual 1407.0806.32 ─ 21
The home page displays the device information required by the LXI standard,
including the VISA resource string in read-only format.
–
"Device Indicator" activates or deactivates the LXI status indication.
When activated, the LXI LEDs flash, both in the browser dialog and in the LXI
dialog of the connected instrument. A green LXI status symbol indicates that a
LAN connection has been established; a red symbol indicates that no LAN
cable is connected.
–
"Lan Configuration" allows you to configure LAN parameters and to initiate a
ping, see
Chapter 2.8.2.3, "Ping Client"
–
"Status" displays information about the LXI status of the instrument.
–
"Utilities" provides access to the LXI event log functionality required by the LXI
standard.
●
"Instrument Control"
–
"Web Control" provides remote access to the instrument, see
●
"Diagnostics"
–
"SCPI Remote Trace" records messages exchanged via the remote control
interface, see
Chapter 2.8.2.5, "SCPI Remote Trace"
●
"Help"
–
"Glossary" explains terms related to the LXI standard.
–
opens the Rohde & Schwarz home page.
► Press the "INACTIVE (press to toggle)" button to activate the connection.
A green flashing status LED indicates the active connection. If the LAN connection
fails, the LED turns red.
The status of the LAN connection is also indicated by the "LAN Status indicator" in
the "LXI Status" dialog.
For further information, see section "LXI Status" in the Operating Manual.
2.8.2 LAN Configuration
The "LAN Configuration" web page provides access to the parameters required for
identifying the R&S
SMB in the network, and allows modification.
Password protection
Changing the LAN configuration is password-protected. The default password is
Lxi-
WebIfc
(notice upper and lower case characters). This password cannot be changed in
the current firmware version.
It comprises the following navigation entries.
LXI Configuration
