Remote Control Commands
R&S
®
SMB100A
364
Operating Manual 1407.0806.32 ─ 21
Example:
LIST:DEXC:MODE IMP
determines that ASCII files with frequency and level value pairs
are imported into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects the ASCII file
list.csv
for import.
LIST:DEXC:SEL '/var/list_imp'
determines the destination file
list_imp
.
LIST:DEXC:EXEC
imports the ASCII file data into the list mode file.
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:LIST:DEXChange:MODE
<Mode>
Selects if list mode lists should be imported or exported. Depending on the selection
here, the file select command defines either the source or the destination for list mode
lists and ASCII files.
Parameters:
<Mode>
IMPort | EXPort
*RST:
IMPort
Example:
LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects that ASCII file
list.csv
is imported.
LIST:DEXC:SEL '/var/list_imp'
selects that the ASCII file
list.csv
is imported into list mode
list
list_imp
.
Manual operation:
See
[:SOURce<hw>]:LIST:DEXChange:SELect
<Filename>
Selects the list mode list to be imported or exported.
The list mode files are stored with the fixed file extensions
*.lsw
in a directory of the
user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR
. A path can also be specified in command
SOUR:LIST:DEXC:SEL
, in
which case the files are stored or loaded in the specified directory.
Parameters:
<Filename>
<list_name>
SOURce Subsystem
