R&S SMB100A, Operating Manual

Page: 311 / 528

Remote Control Commands
R&S
®
SMB100A
296 Operating Manual 1407.0806.32 ─ 21
:HCOPy:DEVice:LANGuage <Language>
Selects the bitmap graphic format for the screenshot.
You can also retrieve the data using command
HCOP:DATA?
. This command is an
alias to command
HCOPy:IMAGe:FORMat
.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST:
PNG
Example: HCOP:DEV:LANG BMP
Selects bitmap as image format.
HCOP:FILE '/usb/HCopy'
Defines the directory, path and filename for storing the hard-
copy.
HCOP
Triggers the hardcopy generation.
Manual operation: See "File Options" on page 123
:HCOPy[:EXECute]
Triggers the generation of a hardcopy.
Example: HCOP
Triggers the generation of a hardcopy of the current display.
Usage: Event
Manual operation: See "Save" on page 125
:HCOPy:FILE[:NAME] <Name>
Creates/selects a file into which the hardcopy is stored.
The path is specified together with the filename. Access to the file via remote control is
possible using the commands of the
MMEM
subsystem. In contrast, command
HCOPy:DATA?
transfers the hardcopy contents directly to the remote client where they
can be further processed.
If automatic file naming is activated, the hardcopy is stored into a file with an automati-
cally generated name (commands
HCOPY:FILE[:NAME]:AUTO:…
).
Parameters:
<Name> string
Example: HCOP:FILE:NAME '/usb/HCopy'
Defines the hardcopy filename.
Manual operation: See "File Info" on page 123
HCOPy Subsystem