Remote Control Commands
R&S
®
SMB100A
291
Operating Manual 1407.0806.32 ─ 21
Manual operation:
See
:DISPlay:ANNotation:FREQuency
<State>
Indicates asterisks instead of the frequency values in the status bar.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
1
Example:
DISP:ANN:FREQ ON
Supresses the frequency display.
Manual operation:
See
:DISPlay:ANNotation[:ALL]
<State>
Displays asterisks instead of the level and frequency values in the status bar of the
instrument. This setting is useful when you remotely control the instrument.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
1
Example:
DISP:ANN:AMPL ON
Shows asterisks instead of frequency and level values.
:DISPlay:DIALog:CLOSe
<DialogId>
Closes the specified dialog. To determine the dialog identifier, use command
.
Setting parameters:
<DialogId>
string
Example:
DISP:DIAL:CLOS "<dialog ID>"
Closes the dialog, determined with the "<dialog ID>".
Usage:
Setting only
:DISPlay:DIALog:CLOSe:ALL
Closes all open dialogs.
Example:
DISP:DIAL:CLOS:ALL
Usage:
Event
:DISPlay:DIALog:ID?
Returns the dialog identifiers of the open dialogs in a string separated by blanks.
DISPlay Subsystem
